Product Review
Recovering Heat from Commercial Kitchen Exhaust
by Brent Ehrlich
Commercial kitchens consume more energy per square foot than any commercial building space. The equipment used in these kitchens—gas ranges, ovens, broilers, deep fryers, gas-fired char broilers, and steamers—produce excess heat as well as combustion gases, particulates, and grease that need to be removed by commercial kitchen ventilation (CKV) systems. Some large institutional kitchens vent over 30,000 cubic feet of air per minute (cfm), and all of that air has to be replaced by make-up air that must be heated or cooled, depending on the climate, significantly raising the overall energy consumption of the restaurant or cafeteria.
The Halton HRU uses a fin-tube heat exchanger that captures heat in the exhaust duct and transfers it to another heat exchanger in the make-up-air ducts using a closed glycol loop. Sensors in the ducts determine whether or not the make-up air needs to be preheated. If not, an optional configuration can divert the glycol loop to heat domestic hot water. According to Jeff Martin, developer and owner of Martin Air System, the large coil can efficiently heat water to temperatures approaching 110ºF–140ºF (60ºC).
This article is BuildingGreen Premium content
Two ways to read the full article and get CEUs:
Purchase this article to get online access and a printable PDF.
Buy it now for »
Already a premium member? Log in now
To read the full article, subscribe now to BuildingGreen Premium
For full access, sign up now for LEEDuser Premium
LEEDuser tip sheets, written by our team of LEED experts, fill gaps in knowledge we’ve observed between the LEED Reference Guide, LEED Online, and LEED Interpretations. We update them regularly so that our members get the most relevant guidance for current issues on their projects.
( does not provide premium access to BuildingGreen)
Go premium for just »
Go premium for just »
Firm or campus members – click here »
Your 15-day free trial expired on
Already a premium member? Log in now
Published November 24, 2010
Permalink
Citation
Ehrlich, B. (2010, November 24). Recovering Heat from Commercial Kitchen Exhaust. Retrieved from https://www.buildinggreen.com/product-review/recovering-heat-commercial-kitchen-exhaust