By submitting your email, you gain access to hundreds of BuildingGreen articles about green building and innovations and agree that BuildingGreen may send you communications with updates about sustainable design and construction. You may unsubscribe at any time. Terms and Conditions and Privacy Policy apply.
Your email address is safe with us
Thousands of architects, designers, and engineers trust our research and advice... you can trust us with your email address.
BuildingGreen will never share or sell your contact information.
Your email address is safe with us
Thousands of LEED professionals trust our research and advice... you can trust us with your email address.
LEEDuser will never share or sell your contact information.
Loading, please wait a moment...
destination: /, mode: buy
You already have a BuildingGreen account — please enter your password:
Your reset password email has been sent.
Click here to send a password reset link to
Loading...
You are already entitled to BuildingGreen premium access through .
To get started, create a personal profile. This will give you full access to BuildingGreen Premium through .To get the free reports, please create a personal profile
Loading...
Create your account to join
The most trusted voice in sustainable architecture and design
For more than 25 years BuildingGreen has never accepted ads or sponsorship, making us an unbiased resource you can count on.
“I’ve relied on BuildingGreen for over a decade—it’s one of the most reputable sources for cutting edge green building news & product research.’
—Mara Baum, Sustainability Director, HOK
Thank you for signing up for BuildingGreen
IMPORTANT: Please check your email to verify your account.
You are now part of ’s group.
Watch your email for tips from our experts on getting the most from BuildingGreen.com.
Here are three special reports you can use today:
Can We Replace Foam Insulation? – There are a lot of reasons to avoid foam, but its high performance can make it a hard habit to kick, as designers are finding out.
How WELL Got Green Building’s Groove Back – WELL is the hottest four-letter word in sustainable design. But will it work to the benefit or the detriment of green building?
20 Ways to Advance Sustainability in the Next Four Years – In this age of political revolution and environmental urgency, it’s time to step back and take a look at priorities, challenges, and opportunities. Here’s our founder Alex Wilson’s take on the best ways to advance sustainability.
With the SECUSOL drainback solar hot water system, the heat exchanger coil in the tank doubles as the drainback tank. Photo: Wagner & Company. Click on image to enlarge.
I was in Boston last week for the annual Building Energy conference, sponsored by the Northeast Sustainable Energy Association. Each year this conference provides an opportunity to connect with friends and colleagues, catch up on leading-edge building design, and learn about product innovations in energy conservation and renewable energy.
I was amazed to see the large number of European companies represented in the conference trade show, with most of the leading innovation in windows, biomass heating, and solar energy seeming to come from Germany.
The product that I found most exciting this year was a unique, drainback solar water heating system, SECUSOL, from the German company Wagner & Company, which is one of Germany's oldest, though not largest, manufacturers of solar water heating systems. Wagner products are represented in the U.S. by Wagner Solar, Inc., of Cambridge, Massachusetts. Before describing what makes the Wagner SECUSOL so exciting, a few words about solar thermal systems are warranted. Over the past few years, solar electricity (photovoltaics) has garnered most of the attention in the renewable energy world. But solar thermal systems, which can include both solar water heating and solar space heating, are often significantly more cost-effective.
Most solar water heaters include flat-plate collectors through which water or a water-glycol mixture is circulated. "Closed-loop" systems have the collector filled all the time, and a pump circulates the fluid from the collectors, where solar heat is absorbed, to the tank, where a heat-exchanger coil transfers that heat to the stored water.
Other systems have an open "drainback" loop. When the sun is shining and the controller tells the pump to turn on, the water or water-glycol solution is pumped through the collectors, and when the sun goes down at night (or power is lost), the fluid in the collectors drains back to a drainback tank. This drainback configuration has the advantage of preventing the collector fluid from getting too hot if the electric pump fails or electricity is lost.
The Wagner SECUSOL system is the latter type of solar water heater, but with several significant distinctions:
SUPPORT INDEPENDENT SUSTAINABILITY REPORTING
BuildingGreen relies on our premium members, not on advertisers. Help make our work possible.
Most drainback systems have a separate tank that has to be plumbed into the system. In the SECUSOL system, an oversized heat-exchanger coil in the storage tank serves as the drainback tank--so one component serves two key functions.
Elegant housingA single housing contains the well-insulated 66-gallon or 92-gallon storage tank, the controls, and the circulation pump (situated beneath the tank and accessible through a hatch). This configuration means that the single unit, which is not much bigger than a standard water heater, contains everything except the collector(s) and a back-up heating element.
Quick-mount fittingsThe plumbing lines that circulate the glycol heat-transfer fluid through the collectors and heat exchanger coils in the tank are pre-insulated flexible copper, and they connect with compression fittings. This avoids the need for soldering, speeds installation, and reduces the risk of installer errors.
Wagner's flat-plate solar collectors are among the world's most efficient, with 96% transmissivity of the glass and a selective absorber surface. Photo: Wagner & Company. Click on image to enlarge.
Pre-programmed controlsThe controls that tell the pump when to turn on and off come pre-programmed, speeding installation.
High-efficiency collectorsThe Wagner EURO C20 AR-M flat-plate copper collectors are among the highest efficiency collectors available. They feature extremely high light transmissivity (96%), a selective coating on the absorber plate, and nearly 2-1/2 inches of mineral wool insulation in the back of the collector. They can be installed flush to the roof or on a racking system, which is also made by Wagner.
Back-up heating elementA second heat exchanger in the insulated tank allows a back-up electric heating element to be installed. In this way, the single tank can provide a family's entire water-heating needs. When solar energy is adequate, the electric element isn't needed, but when there isn't enough solar, the family has hot water.
Easy, rapid installationThe various innovations with Wagner's SECUSOL solar water heating system enable it to be installed rapidly and efficiently. A skilled installer can install two complete systems per day, according to Wagner Solar, which is remarkable. This helps keep the total cost down. Tyler Plante of Wagner Solar, Inc., in Cambridge, told me that systems are typically installed for between $7,500 and $8,000.
Wagner also produces some elegant solar space heating systems with packaged components and easy integration with conventional or pellet-fuel heating equipment. More about active solar space heating in a future blog.
Wagner Solar introduced Wagner products to the U.S. market in late 2010 and has installed slightly over 100 systems to date through the East Coast, but mostly in Massachusetts, according to Plante. The company is currently expanding its dealer network. Here's a link to the Wagner Solar listing in our GreenSpec database (requires log-in). This is one of the standout products among more than two dozen packaged solar thermal entries that we include in GreenSpec.
(2012, March 13). German Innovation in Solar Water Heating. Retrieved from https://www.buildinggreen.com/news-article/german-innovation-solar-water-heating
The important thing to remember with investments in such systems, is that it is a long term investment. The short term initial cost can often be very large, and take many years to provide any relative saving or return.
it is important to remember this, it will take time to make back your investment. However, it will eventually return on the investment and then some, as well as this there are the obvious benefits to the environment and your carbon output.
Thank you, Alex! Between Building Green and Green Building Advisor you folks produce so much good stuff that it's sometimes hard to stay on top of it all. Thanks for all your excellent work.
Bill
Add new comment
To post a comment, you need to register for a BuildingGreen Basic membership (free) or login to your existing profile.